短切氈
Chopped strand mat
眾杰玻璃纖維短切氈是由玻璃纖維短切原絲通過粉末或乳液粘結劑無定向粘結而成。適用于各種樹脂增強系統，如不飽和聚酯樹脂，乙烯基樹脂和環氧樹脂等。廣泛應用于手糊，纏繞，模壓等成型產品，如造船，汽車，冷卻塔，衛浴器具，防腐管道及其他玻璃鋼制品。
Chopped strand mat is made of fiberglass chopped strands bonded with powder or emulsion binder uniformly. It is compatible with Polyester, Vinyl and Epoxy resin and widely used in boat building, automotive, cooling towers, bathroom accessories, anti-corrosion pipes etc, suitable for hand lay up, filament winding, press molding forming processes.
基本數據
General Data
規格型號 Code | 質量 Weight (g/m2) | 粘結劑 Binder type | PET無紡布 Polyester tissue(g/m2) | 可燃物 L.O.I % | 含水率% Moisture content | 拉伸斷裂強力(N/150mm) Tensile breaking force | |
縱向Vertical | 橫向 Horizontal | ||||||
EMC100 | 100 | Emulsion | -- | 1.8-8.5 | ≤0.2 | ≥40 | ≥40 |
EMC150 | 150 | Powder/Emulsion | -- | 1.8-8.5 | ≤0.2 | ≥40 | ≥40 |
EMC200 | 200 | Powder/Emulsion | -- | 1.8-8.5 | ≤0.2 | ≥40 | ≥40 |
EMC225 | 225 | Powder/Emulsion | -- | 1.8-8.5 | ≤0.2 | ≥40 | ≥40 |
EMC300 | 300 | Powder/Emulsion | -- | 1.8-8.5 | ≤0.2 | ≥60 | ≥60 |
EMC380 | 380 | Powder/Emulsion | -- | 1.8-8.5 | ≤0.2 | ≥60 | ≥60 |
EMC450 | 450 | Powder/Emulsion | -- | 1.8-8.5 | ≤0.2 | ≥60 | ≥60 |
EMC600 | 600 | Powder/Emulsion | -- | 1.8-8.5 | ≤0.2 | ≥80 | ≥80 |
EMC200/N45 | 245 | Powder | 45 | 20-26 | ≤0.2 | ≥150 | ≥40 |
EMC300/N45 | 345 | Powder | 45 | 15-20 | ≤0.2 | ≥200 | ≥60 |
EMC450/N45 | 495 | Powder | 45 | 10-15 | ≤0.2 | ≥200 | ≥60 |
Remarks:
Roll width: Standard width in 1040mm, 1270mm, and other sizes depends on customer’s real needs, available in 200mm to 3200mm.
Packing: Fiberglass chopped strand mat is usually rolled in a paper tube with inner diameter 76mm. The roll is warped with plastic film, then put into carton. Lay the rolls horizontally, and can be loaded on pallets and bulk in container.
Storage: The product should be stored in a cool, water-proof area. It is recommended that the room temperature and humidity be always maintained at 15℃ to 35℃ and 35% to 65% respectively. Please keep the product in its original packaging before being used, avoiding moisture absorption.